7
Fade
This function allows you to select a preprogrammed fade sequences speed. Press Enter to set the desired sped use the
up/down keys. Press Enter to confirm the settings.
Strobe
Dimming Speed
Press Enter to select the desired dimming speed when used with a DMX controller. Use the up/down keys to select from
0 to 3. 0 speed will be the fastest 3 will be the slowest. Press Enter to confirm.
This function allows you to select a preprogrammed strobe sequences. Press Enter use the up/down keys to select de-
sired strobe speed program (15 options). Press Enter to confirm the settings. (note; Dimmer of selected intensity must
be dimmed prior in Dimmer option)
Strobe Mode
Fade Mode
Dimming Curve
Settings
This function allows you to dim up or down the LED’s . Press Enter use the up/down keys to select desired color to ad-
just settings.
Settings
LCD
Back Light
DMX
Fail
DMX
Synchronous
Factory
Reset
Use the up/down keys to select desired wait time before auto turn off of the display or
on for always on display. Press Enter to confirm.
Use the up/down keys to select the function of the light if DMX signal is removed. Off
will turn the dimmer off. Hold will hold the last DMX command. Press Enter to Con-
firm
Use the up/down keys to select to return the fixture to original factory settings
To Next Page
Loading...