Megacom Pocket Dual Catchmon User Manual

User Manual
AUTO
AUTO
Auto-catching Pokemon
Auto-collecting items
walking for hatching Eggs
Dual accounts can be used.
Kill two birds with one stone
Automatically replenish and capture,
earn stardust, candy, and XP
One-click connection
600 hours of standby powe
Goes into sleep mode when
disconnected, with up to 600 hours
of standby power, alkaline AAA
batteries recommended.
Capture time delay function
Built-in unique function captures
time delay. No setting necessary.
AAA
AAA
Hanging hole
Two alkaline AAA batteries
(not included) to be inserted
in battery compartment in strap
2P/LED status light/
function key
1P/LED status light/
function key
2.Go to Pokemon Go and click
“Main Menu”
Main Menu
3.Click “Settings” in upper right corner
Insert two AAA batteries and DualCatchmon will automatically start. 1P and 2P will flash
green several times and enter work mode before connection.
Settings
AVAILABLE DEVICES
A green light will ash
in Catchmon before it
connects with phone.
4.Go to bottom and click
“Pokémon Go Plus”. Two
available devices (Catchmon 1P
and 2P) are shown below.
AVAILABLE DEVICES
AVAILABLE DEVICES
6.After successful connection,
available devices on the app will
light up like the graph.
LED will be purple and
flashing when Catchmon is
connected.
Connecting to Pokémon Go Plus...
If Catchmon had successfully connected with
phone before and signal is lost, LED will be blue
and flashing. To reconnect, simply click Go Plus
icon at top right in phone app map. (Purple light
flashing if connection successful)
To connect with new phones, first delete old Catchmon connection.
Methods are indicated as follows.
Catchmon tips
NOTIFICATIONS
NOTIFICATIONS
Nearby Pokemon
Nearby Pokestop
How to connect Catchmon with phone for first time
5.Press Catchmon 1P or 2P. A light
will appear at the center of
available device in phone. Click on
desired device on phone to start
connecting with Catchmon.
1. Catchmon's built-in random delay capture time.
2. If bag is full and cannot collect items from Pokestop,
first deactivate "Nearby Pokestop" notification in Go Plus.
3. If out of red Pokeballs and temporarily cannot capture,
first deactivate "Nearby Pokémon" notification in Go Plus.
Alternate and make it easier to collect, capture,
and acquire stardust.

Megacom Pocket Dual Catchmon Specifications

General

Brand	Megacom
Model	Pocket Dual Catchmon
Category	Cell Phone Accessories
Language	English

Summary

Connecting Catchmon for First Time

Initial Startup and Mode

Insert batteries; device starts and flashes green, indicating work mode before connection.

App Navigation for Connection

Access 'Main Menu', then 'Settings' in the Pokémon Go app to find connection options.

Selecting Pokémon Go Plus

Scroll to 'Pokémon Go Plus' in settings to view available Catchmon devices (1P and 2P).

Initiating Device Pairing

Press Catchmon 1P or 2P; a light appears on phone. Select device on phone to start pairing.

Connection Confirmation

Connected devices light up. 1P/2P LEDs flash purple when connection is successful.

Function and Light Descriptions

Disconnecting Catchmon

Press and hold the button for 3 seconds to disconnect. Blue light indicates disconnect mode.

Notification Sound Switch

Press and hold the button for 3 seconds in green light display to switch notification sound on/off.

Vibration Switch

Press and hold the button for 3 seconds in purple light display to switch vibration on/off.

Additional Instructions & Troubleshooting

Automatic Disconnection & Sleep Mode

Catchmon may disconnect hourly; enters sleep mode if not reconnected within 10 minutes.

Connection Troubleshooting Steps

Try disconnecting Bluetooth, game settings, restarting app/device, and re-pairing.

Compatibility Requirements

Requires iPhone 6+ (iOS 11+) or Android devices with 2GB RAM (Android 7.0+).