EasyManua.ls Logo

MegaGuard ProPlus SG9265064 User Manual

MegaGuard ProPlus SG9265064
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SG9265064
INSTRUCTION MANUAL
Question and Answer IconNeed help?

Do you have a question about the MegaGuard ProPlus SG9265064 and is the answer not in the manual?

MegaGuard ProPlus SG9265064 Specifications

General IconGeneral
BrandMegaGuard ProPlus
ModelSG9265064
CategoryMeasuring Instruments
LanguageEnglish

Summary

EC Conformity

Safety Instructions

Warranty and Repair

Environmental Protection

Technical Features

Probes and Accessories

Front Panel Overview

Battery Replacement

Procedure for replacing the instrument's batteries, specifying alkaline types.

Operative Instructions

Powering On/Off

Instructions for turning the MegaGuard ProPlus instrument on and off.

Measuring Voltage Setup

Configuring the measurement voltage for the instrument.

Display Format Options

Setting the resistance reading display between natural and exponential formats.

Measurement Procedure

Steps for performing a resistance measurement and stabilizing the reading.

Programming Mode Access

How to enter the instrument's programming mode.

Programming Menu - Memory

Accessing and managing stored measurements within the programming menu.

Programming Menu - Alarm

Configuring audible alarm thresholds in the programming menu.

Programming Menu - Settings

Adjusting temperature units (°C/°F) and display contrast.

Point to Point Measurement

Measuring with Non-Shielded Probes

Measuring Resistance to Ground

Measuring Resistance Through a Person to Ground

Measuring Surface Resistance Rs

Measuring Volume Resistance Rv