9
OPERATING INSTRUCTIONS
PREPARING TO LIGHT YOUR GRILL
THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND SHALL NOT BE USED IN A BUILDING,
GARAGE OR ANY OTHER ENCLOSED AREA.
FIND A LEVEL SURFACE ON WHICH TO PLACE THE GRILL.
STEP 1
MOVING INSTRUCTIONS
Caution: Never move the grill with burners lit.
Make sure control knob is in the “OFF” () position. Disconnect the propane cylinder from the regulator.
Remove the regulator from the propane tank. Be sure the grill has completely cooled for at least 30 minutes.
Close the lid. Use the side handles to carry the grill.
NOTE: It is best to leave the grease cup in place attached on the grill; some grease may continue to drip
from drain hole during transport.
REMOVE THE PROTECTIVE PLUG FROM THE REGULATOR
CONNECTOR.
CONNECT TO TANK.
STEP 2
STEP 3
To Next Page