Need help?Do you have a question about the MEGASTEK MT-200 and is the answer not in the manual?
General| Update Rate | 1 Hz |
|---|---|
| Position Accuracy | 10 m |
| Velocity Accuracy | 0.1 m/s |
| Acquisition Time (Hot Start) | 1 s |
| Battery Life | 3 hours |
| Preloaded Maps | Yes |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -20°C to 70°C |
| Resolution | 320 x 240 |
| Processor | 400MHz |
| Memory | 64MB |
| Battery | Li-ion rechargeable |
Lists and illustrates the components included in the tracker's package.
Presents detailed visual descriptions of the tracker from different angles.
Details the function and indication of all LEDs, ports, and buttons on the device.
Guides users through initial setup, including SIM card installation and powering on.
Guides on how to change the tracker's password for security and configuration.
Explains how to set up to five authorized phone numbers for alarms and calls.
Details different operational modes like Tracking, Call, Monitoring, Standby, and Pet.
Describes how to obtain the tracker's location by calling it.
Explains how to get the tracker's current location in real-time via SMS command.
Details how to configure the tracker to send location data to a server at regular intervals.
Provides the command to remotely restart the tracker device.
Explains how to reset the tracker's settings to factory defaults.
Details how to set the tracker to send SMS location updates at timed intervals.
Describes the different SMS formats the tracker uses for replies and location data.
Explains how to set the tracker's time zone for accurate local time reporting.
Guides on testing the SD card's functionality for data logging.
Details how to set up an alarm that triggers when the tracker exceeds a set speed limit.
Explains how to set geographical boundaries and receive alerts when the tracker enters or leaves them.
Describes how to set up an alarm that triggers when the tracker moves within or out of a specified radius.
Details how to configure an alarm that activates when the tracker detects significant vibration.
Informs about the alarm triggered when the tracker's battery level drops below 30%.
Explains the SOS button functionality for sending emergency alerts with location data.
Troubleshooting steps for when the tracker fails to power on, including button press and battery checks.
Addresses issues with SMS communication, checking GSM signal, SIM card, and credit.
Diagnoses GPS reception issues related to LED status, advising on placement and sky view.
Troubleshoots GPRS connectivity, checking SIM function, IP/port settings, and GSM signal.
To Next Page