To Next PageTo Next PageWhat to do if my MEGATEK CB-M25BT will not turn on?
If your boombox will not turn on: * Unplug your boombox for a few moments, then plug it back in. * Ensure the AC outlet is working by plugging another device into it.
What to do if my MEGATEK CB-M25BT won’t connect to my Bluetooth device?
If your boombox isn’t connecting to your Bluetooth device, try these steps: * Reduce the distance between your boombox and Bluetooth device. * Turn both devices off and then on. Re-pair them. * Ensure your boombox isn’t paired with another Bluetooth device. * Confirm that both are in pairing mode. * Make sure your Bluetooth device isn’t paired with other devices. * Select “Bluetooth device” on your Bluetooth device.
What to do if my MEGATEK CB-M25BT CD Player CD skips while playing?
If a CD skips while playing, try the following: * Clean the CD with a cloth. * Try a different CD. * Make sure the CD isn’t warped, scratched, or damaged. * Ensure the boombox isn't affected by vibration or shock. Move it if needed. * Verify you're using a compatible CD (standard and 3" audio CDs, CD-Rs, and CD-RWs).
What to do if my MEGATEK CB-M25BT CD Player will not play?
If the CD player won't play, check the following: * Ensure a CD is in the compartment. * Make sure the CD is inserted label side up. * Try a different CD. * Verify the CD player isn't paused. * Select the CD mode. * Confirm you're using a compatible CD (standard and 3" audio CDs, CD-Rs, and CD-RWs).
General