Need help?Do you have a question about the MEGELIN JML1 and is the answer not in the manual?
Clean face and neck thoroughly and keep dry before using the LED mask for optimal results.
Connect controller and straps, wear mask, press power for 1.5s to turn on. Default red light.
Switch color light using selection button. Adjust time (10, 15, 20 min) using time button.
Device auto-shuts off after set time. Remove mask and proceed with skincare.
Do not use if pregnant, light-sensitive, or have certain skin/eye diseases like lupus or albinism.
Do not use while charging. Charge controller fully before first use. Indicator shows charging status.
Place mask on arm, turn on, shine for 10 min. Check for redness or itching.
Clean face and keep dry, without makeup, to ensure accurate light sensitivity test results.
Skin may show temporary redness. Stop use if burning or discomfort occurs.
Clean your face thoroughly and keep it dry before application.
Connect cables, attach straps, wear mask, and press power for 1.5s to activate.
Choose from seven colors and set treatment time (10, 15, 20 min).
Mask auto-shuts off at set time. Remove mask and continue with daily skincare.
Recommended 3-5 times weekly for 4 consecutive weeks, 10-20 minutes per session.
Store the product in a dry, room temperature environment, away from dust and sunlight.
Wipe the mask with a damp cloth after use. Ensure the device is off and unplugged.
Remove battery before discarding. Dispose of battery safely at government-stipulated recycling units.
General| Brand | MEGELIN |
|---|---|
| Model | JML1 |
| Category | Personal Care Products |
| Language | English |
To Next Page