Megmeet MTC-08-NT User Manual

15
time 0 ~
900(minutes)
#411/#487
#430/#506
#449/#525
#468/#544
Step 4 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W
Y
#412/#488
#431/#507
#450/#526
#469/#545
Step 5 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W
Y
#413/#489
#432/#508
#451/#527
#470/#546
Step 6 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W
Y
#414/#490
#433/#509
#452/#528
#471/#547
Step 7 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W
Y
#415/#491
#434/#510
#453/#529
#472/#548
Step 8 time * 2
Default value :0,
time 0 ~
900(minutes)
R/W
Y
#416/#492
#435/#511
#454/#530
#473/#549
Repeat start step *
3
Default value :2,
range:1~8
R/W
Y
#417/#493
#436/#512
#455/#531
#474/#550
Repeat end step * 4
Default value :0,
Range:0~99
R/W
Y
#418/#494
#437/#513
#456/#532
#475/#551
Multi-step control
state * 5
Default value :0,
Range:0~99
R/W
Y
#552
Multi-step control
execution flag of
CH1 ～ CH8 * 6
Set 1-8 channels,
default
value :B0000
R/W
Y
0:No multi-stage
control
R/W
Y
1: perform
Multi-step control
R/W
Y
* 1. #400 ~ #407, #419 ~ #426, #438 ~ #445, #457~#464,#476~#483,#495~#502,#514~#521,
#533~#540: temperature Settings for each channel segment. The unit is determined according to each
input type. When the mode is Celsius, the unit is 0.1℃; when the mode is Fahrenheit, the unit is 0.1℉.
* 2. #408 ~ #415, #427 ~ #434, #446 ~ #453, #465 ~ #472,#484~#491,#503~#510,#522~#529,
#541~#548: execution time of each channel segment. When running multi-step Settings, the first stage
execution time of each channel cannot be set to 0.
* 3. #416, #435, #454, #473,#482,#491,#500,#509: the starting segment number that needs to be
repeated when setting the multi-step setting of each channel.
* 4. #417, #436, #456, #474,#493,#512,#531,#550: the termination number that needs to be repeated
when setting the multi-step setting of each channel. The end segment number must not be less than the
start segment number of the channel, otherwise an execution error will result.
* 5. #418、#437、#457、#475、#494、#513、#522、#541: set the number of repeats for each channel.
* 6. #552: multi-step set enabled. #552 is effective with 8 bits less, the multi-step set function of Bit0
control channel 1 is start, the multi-step setting function of Bit1 control channel 2 is started, and so on.

Megmeet MTC-08-NT Specifications

General

Brand	Megmeet
Model	MTC-08-NT
Category	Thermostat
Language	English