32
CH1 cool side integral time
CH2 cool side integral time
CH3 cool side integral time
CH4 cool side integral time
2.MTC thermostat return the frame with the MCbus communication buffer. Take MTC#1 region as an
example: when D7532 and D7563 change to 8, the write is successful and up to 30 D elements can be
written at a time. The return frame definition is shown in the following table.
Table 3-14 MTC thermostat communicate the return frame of the buffer of write command 8
CH1 cool side proportional
band
CH1 cool side derivative
time
CH2 cool side proportional
band
CH2 cool side derivative
time
CH3 cool side proportional
band
CH3 cool side derivative
time
CH4 cool side proportional
band
CH4 cool side derivative
time
CH1 cool side integral time
CH2 cool side integral time
CH3 cool side integral time
CH4 cool side integral time
3.2.6 Command word routine
The routines written by the user in accordance with the method described in 3.2.5 programming are
shown below. The routines written for the methods described are shown below.
This routine takes the communication between the main module and MTC#1 as an example and
operates under the cooperation of the man-machine interface. For example, D202, D102, M0, M1, M2,
etc., can be set through the man-machine interface.
Read command 4
To Next Page
Loading...
Need help?
General