MEGWR TF-X1 - User Manual

DOG
Training Collar
MODEL:TF-X1
MEGWR
Retail price
$199.99
The product is designed to foster good habits in pets, not punish them.
Do not overuse this product on pets.
NOTE: PLEASE READ THE MANUAL CAREFULLY BEFORE USE AND SAVE FOR FUTURE REFERENCE!

Summary

SAFETY INSTRUCTIONS

Safe Use Statement

General safety guidelines for using the product.

Electric Shock Safety Statement

Precautions related to electric shock.

Safety Statement for Wearing and Training

Guidelines for safe collar wear and training practices.

COMPONENTS

Transmitter

The handheld control unit for the dog training collar.

Receiver (including collar)

The collar worn by the dog with stimulation elements.

Test Board

Tool for testing the shock function.

E-shock Contactors

Parts delivering electric stimulation to the dog.

Silicone Protective Sleeve

Protective covers for shock contactors.

Lanyard

Strap for carrying the transmitter.

Charging Cable

Cables for charging the device.

User Manual

The product's instruction booklet.

PARAMETER

Receiver Parameters

Technical specifications for the receiver unit.

Transmitter Parameters

Technical specifications for the transmitter unit.

Function

Key features and capabilities of the dog training collar system.

RECEIVER INTRODUCTION

Receiver Components

Labels and identification of parts on the receiver collar.

Transmitter Introduction

Transmitter Components

Labels and identification of parts on the transmitter.

User operation

Charge the Product Before Using It

Instructions for charging the transmitter and receiver.

Turn It On;Off

Steps for powering the device on and off.

Remotely Shut Down

How to turn off the device remotely.

Switch Channel Setting

How to change the operating channel for the receiver.

Channel Setting

Detailed steps for setting the transmitter channel.

Lock Key

How to enable and disable the transmitter's lock function.

Set the Shock Level

Adjusting the intensity of electric shock stimulation.

Vibration Level Setting

Adjusting the intensity of vibration stimulation.

Dog Finder

Using the function to locate the dog.

Train the Operation

How to use beep, vibration, and shock for training.

Matching

Pairing the transmitter with the receiver.

Transmitter Factory Reset

Restoring the transmitter to its default factory settings.

Low Battery Power

Indicators and behavior when the battery is low.

Setting Guide

Setup Guide

Guidance on selecting training levels based on dog size.

Install Receiver

Install the E-shock Contactors

Instructions for attaching the electrical contact points.

Install the Silicone Protective Sleeve

Instructions for fitting protective sleeves onto contactors.

Functional Testing

Functional Testing Steps

Steps to verify the proper operation of the device's functions.

The Wearing of Receiver

Wearing the Receiver

How to properly fit and adjust the collar on the dog.

FAQ

Receiver Not Working

Troubleshooting common issues with the receiver's functionality.

Product Safety and Humane Use

Information on the product's safety and ethical use.

Receiver and Transmitter Not Working

Troubleshooting guide for device startup issues.

Troubleshooting

Unable to Turn On

Steps to resolve issues when the device does not power on.

Unable to Charge

Steps to resolve issues when the device cannot be charged.

Receiver Unresponsive

Steps to resolve issues when the receiver is unresponsive.

Terms of Use & Limitation of Liability

Terms of Use

User acceptance of product terms and conditions.

Correct Usage

Guidelines for proper product usage.

Prohibited Use

Restrictions on misuse and unlawful application of the product.

Scope of Responsibility

Manufacturer's disclaimer on liability for product misuse.

Terms Modification

Manufacturer's right to alter terms.

Certification Statements

FCC Compliance

Statement regarding compliance with FCC Rules.

Recycling Information & Battery Disposal

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The MEGWR DOG Training Collar, model TF-XI, is a pet training device designed to foster good habits in pets rather than punish them. It features a remote control (transmitter) and a receiver collar, both equipped with digital displays for enhanced visual design and ease of use. The product emphasizes safe and humane training practices, advising against overuse and recommending consultation with a professional dog trainer for aggressive dogs or if there are health concerns.

Function Description

The training collar offers four primary training modes: beep, vibration, E-shock, and Dog Finder. These modes are designed to provide various levels of stimulation to help correct unwanted behaviors and reinforce positive ones. The device allows for 18 levels of electric shock and 8 levels of vibration, providing a wide range of intensity to suit different dog temperaments and training conditions. The remote control can be paired with up to three receivers simultaneously, making it suitable for households with multiple pets or for training multiple dogs at once.

The "Dog Finder" function helps locate the dog by activating a white light flash or an RGB breathing light on the receiver, accompanied by a blinking dog icon on the transmitter. This feature is useful for finding pets in low-light conditions or when they are out of sight.

Important Technical Specifications

Receiver:

• Battery: 300mAh/3.7V lithium battery
• Input voltage: DC5V/1A
• Standby time: 30 days (triggering 20 times a day)
• Collar length: 25 inches (62 cm)
• Waterproof Grade: IP67 (can be placed in water up to one meter deep for half an hour, dustproof)
• Service temperature: -10°C to +50°C
• Net weight: 2.3 oz
• Product size: 2.83 x 1.45 x 0.9 inches
• Wireless frequency: 433.92MHz

Transmitter:

• Battery: 420mAh/3.7V lithium battery
• Input voltage: DC5V/1A
• Standby time: 45 days (triggering 20 times a day)
• Wireless distance: 2500FT
• Waterproof Grade: No Waterproof
• Service temperature: -10°C to +50°C
• Net weight: 2.68 oz
• Product size: 5.19 x 1.7 x 0.6 inches
• Wireless frequency: 433.92MHz

Both the remote and receiver feature battery power displays, and the system supports fast charging. The IP67 waterproof rating applies only to the receiver collar, while the remote control is not waterproof.

Usage Features

Safe Use:

• Prohibited for use on aggressive dogs.
• Not suitable for children to play with; keep out of reach of children.
• Ensure the dog is healthy before use; consult a veterinarian if unsure.
• Avoid human contact with electric shock contacts when the device is on.
• Discontinue use if skin rashes or sores are found on the wearing area until the skin heals.
• The wearing time should not exceed 12 hours a day, and the wearing position should be adjusted every 1-2 hours.
• Suitable for dogs weighing over 7lb and aged over 6 months.
• Not to be used as a matching collar for a pet leash.
• Remove the device before playing with the dog to avoid accidental triggering.

Components: The product package includes:

• 1 Transmitter
• 1 Receiver (including collar)
• 1 Test board
• 1 set of E-shock Contactors (long/short, 2 sets total)
• 1 set of Silicone protective sleeves (2 sets total)
• 1 Lanyard
• 2 Magnetic charging cables
• 1 User manual

Operation:

• Charging: The transmitter takes 1.5-2 hours to charge, indicated by a flashing battery icon that becomes solid when full. The receiver also takes 1.5-2 hours, with a red status light turning steady green when fully charged.
• Power On/Off: Long press the receiver key for 2 seconds to power on (screen lights up, green status light blinks every 5 seconds). Long press again for 2 seconds to power off (screen darkens).
• Channel Setting: The default channel is 1. To switch channels (up to 3 receivers), enable the channel switching function by pressing and holding the CH key on the transmitter for 5 seconds in standby mode. Then, short press CH to cycle through channels 1, 2, and 3.
• Lock Key: Flip down the lock key switch to activate the lock function, preventing accidental presses. The lock key icon lights up, and other keys will not respond. Flip up to disable.
• Shock Level Adjustment: When the screen is on, use the "+" or "-" buttons to adjust the shock level from 0-18 (0 is off).
• Vibration Level Setting: Press the vibration button on the transmitter to enter vibration level setting mode (vibration icon flashes). Use "+" or "-" to adjust levels from 1-8. The setting mode automatically exits after 5 seconds of inactivity.
• Training Modes:
  • Beep: Short press the beep key on the transmitter; the receiver will chirp for 1 second. Long press for continuous chirps (10 times).
  • Vibration: Short press the vibration key; the receiver will vibrate for 1 second at the preset level. Long press for continuous vibrations (10 times).
  • E-shock: Short press the shock key; the receiver will deliver a single shock at the preset level. Long press for 5 continuous shocks.
• Matching:
  1. Turn on the receiver and briefly press its power key twice to enter pairing state (blue light flashes).
  2. On the transmitter, select the desired channel (1, 2, or 3) and long press the beep key for 2 seconds. The transmitter sends the pairing command, and its channel number flashes.
  3. Successful matching is indicated by the receiver's blue light staying on for 3 seconds. If pairing fails after 30 seconds, the receiver automatically exits pairing state.
• Transmitter Factory Reset: Within 15 seconds of restarting, press and hold the shock key for 2 seconds. The backlight flashes 5 times, indicating a successful factory reset.
• Low Battery Warning: When the receiver's battery is low (less than 1 grid), the red status indicator blinks once every 5 seconds, and the receiver will automatically shut down after 20 minutes. The transmitter also indicates low battery on its display.

Maintenance Features

• E-shock Contactor Installation: Select long or short E-shock contactors based on the dog's coat length and install them on the back of the receiver. Ensure appropriate force is used to avoid damaging the device.
• Silicone Protective Sleeve Installation: Cover the E-shock contactors with the conductive silicone protective sleeves to reduce physical damage to the dog's skin.
• Functional Testing: After assembly, it is recommended to test the functions:
  • Sound Test: Short press the beep key on the transmitter; the receiver should beep for 1 second.
  • Vibration Test: Short press the vibration key; the receiver should vibrate for 1 second at different levels.
  • Shock Test: Press the test board onto the shock columns of the receiver. Short press the shock key on the transmitter; the light on the test board should illuminate, with brightness increasing with higher shock levels.
• Troubleshooting: The manual provides a guide for common issues like the device not turning on, not charging, or the receiver not responding, along with corresponding solutions such as charging, checking connections, re-pairing, or contacting the seller.
• Cleaning: It's okay to cut long hair around the throat area for better contact, but shaving completely is not recommended.
• FCC Compliance: The device complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any received interference. Users are warned that unauthorized changes or modifications could void their authority to operate the equipment.
• Recycling: Users are advised to observe local regulations for disposing of electronic and electrical devices and spent batteries, emphasizing separate collection and recycling.

The MEGWR DOG Training Collar is designed to be a comprehensive and user-friendly tool for pet owners, providing a range of features to support effective and humane dog training.

MEGWR TF-X1 Specifications

General

Brand	MEGWR
Model	TF-X1
Category	Pet Care Product
Language	English