To Next PageTo Next Page
Need help?Do you have a question about the Meiji MSD-02 and is the answer not in the manual?
General| Brand | Meiji |
|---|---|
| Model | MSD-02 |
| Category | Security Sensors |
| Language | English |
Specifies the voltage required for the smoke detector to operate, set at DC 9V.
Indicates the current consumption when the detector is in standby mode, specified as less than 10uA.
Details the current drawn by the detector when an alarm condition is active, noted as less than 20mA.
Defines the sound pressure level produced during an alarm, required to be greater than 85dB at 3 meters.
Specifies the type and color of the LED used for status indication, which is a Red LED.
Describes the threshold for low voltage detection, triggering an alarm below 7.3V.
Outlines the operational temperature range for the device, from -10°C to +40°C.
Specifies the acceptable humidity level for operation, not exceeding 95%RH.
Provides the physical dimensions of the smoke detector unit in millimeters, illustrated with diagrams.
Details the step-by-step process for testing the smoke detector's functionality, including battery installation.
Provides instructions for correctly installing the smoke alarm onto a ceiling using a mounting panel and screws.
Advises against placing the product in environments that are humid, dusty, or exposed to smoke.
Explains that the detector will alarm to signal when the battery level is low and needs replacement.
