Basic functions
5. M mode
Under the M( Manual setting) mode,you can set the flash index as you like.
1
Press<mode> button to change to M mode
The picture is the M mode interface of the speedlite.
2
Increase the brightness of the speedlite.
Press the " " button to set the brightness of the speed-
lite. The maximum brightness value of the speedlite is 1/1
(The-re're 3 grades of power fine adjustment on every
gear)
3
Decrese the brightness of the speedlite.
Press the " " button to set the brightness of the speed-
lite. The minimum brightness value of the speedlite is 1/
128(There're 3 grades of power fine adjustment on every
gear)
-13-
To Next Page
Loading...