Basic functions
6. Stroboflash( ) mode
1
2
Press <mode> to change to the stroboflash mode.
The picture is the interface of the strobeflash.
Increase the input brightness of the flash
Press the" " button to adjust the input brightness of the
flash.The maximum brightest setting of the flash is 1/4
(There're 3 grades power fine adjustment of every gear)
Stroboflash is a kind of model that can analyse the motion of subject.
Under the stroboflash mode,the flash can photo a series of moving subjects for many photos.
You can set the flash rate.( the flash times one second, use H
Z to represent it),flash times
and flash input.
-14-
To Next Page
Loading...