Basic functions
Stroboflash( ) mode
3
Decrease the input brightness of the flash
Press the button to adjust the input brightness of the
flash. The minimum brightness setting of the flash is 1/
128
" "
-15-
The strobeflash setting
Press<SET>button,the “ ” is twinkle,then you can set
the strobeflash time of speedlite. The times of the strobe-
flash is from 1 to 90 (more parameters setting see P44
form). When the number of the times is set, you can
adjust flash ferquency press<SET> button again.
4
5
The setting of the stroboflash
Press the SET button, there's twinkle.Then you can
use” ” “ ” button adjust the frequency from 1 to 100
(more parameters setting see P44 form).
The flash parameter will be saved and quit after press
set button again.
The flash will be saved and quit if parameter was
chosen twinkle in 10 seconds.
" "
To Next Page
Loading...