Need help?Do you have a question about the Meinberg CON/TTL/FO and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Input Interface | TTL |
| Output Interface | Fiber Optic |
| Wavelength | 1310 nm |
| Connector Type | ST |
| Power Supply | 5V DC |
| Fiber Type | Single-mode |
| Operating Temperature | 0°C to 50°C |
General safety instructions and protective measures for device operation and installation.
Description of symbols and pictograms used in the manual for hazard illustration.
Guidelines and precautions for the secure installation of the device.
Instructions for correct connection to the protective earth conductor for safe operation.
Precautions to ensure safe operation, including avoiding short-circuits and ventilation.
Safety notice regarding laser class 1 optical interfaces and handling of connectors.
Warnings and precautions for safe maintenance, including using approved parts and avoiding hazards.
Instructions for cleaning the device, emphasizing dry cleaning and avoiding liquids.
Measures to protect electrostatically sensitive components from discharge during handling.
Information on WEEE directive compliance and proper disposal of the product.
Physical specifications of the aluminum profile case, including dimensions and protection rating.
Converts input signals (TTL, RS422, FO) to FO output signals.
Converts FO input signals to electrical output signals (TTL or RS-422).
Converts RS-232 signals (TxD/RxD) into optical signals.
Modules for amplitude-modulated Time Code AM signals over optical fiber.
Converts input signals (TTL, RS422, FO) to single mode FO output signals.
Converts single mode FO input signals to electrical output signals (TTL or RS-422).
To Next Page