Need help?Do you have a question about the Meinberg GPS167 and is the answer not in the manual?
Details the required +5V power supply and connection points.
Instructions for antenna placement for optimal satellite reception.
Configures pulse outputs (POUT 1-3) including mode and timing.
Details Single Pulse, Cyclic, PPS, PPM, PPH modes and their settings.
Details the 6-channel C/A code receiver with external antenna.
General| Frequency Output | 10 MHz |
|---|---|
| Type | GPS Clock |
| Input | GPS |
| Accuracy | ± 100 ns |
| Output | 1PPS, Time Code |
| Time Code Formats | IRIG-B, DCF77, NMEA |
| Power Supply | 100-240 VAC |
| Operating Temperature | -20 to +70 °C |
| Dimensions | 19" rack mount (1U) |
| Serial Interface | RS232 |
To Next Page