Meisort VR13 User Manual

Meisort
VR13 IP Camera
Step by Step Operating Manual

Step 1: AC Power Supplies
VR13 IP Camera is powered by AC using an adaptor, and rechargeable battery is not required. After power
connecting is ready, the indicating light will display blue color.

Step 2: App Download
There are two options for APP Download to your smart devices. You can download the V380 APP by QR
code scan or searching “V380” in App Stores for IOS or Android.
OR

Step 3: Camera Resetting

on the camera.it will have a prompt tone.You can see the light turned into blue.Use the bar reset the
camera,Long Time press until the prompt tone.
2
、
WLAN setting of your phone and connect with the wifi start with MV+(camera ID) wifi.

Meisort VR13 Specifications

General

Brand	Meisort
Model	VR13
Category	Security Camera
Language	English

Summary

AC Power Supplies

App Download

Camera Resetting

Connecting to Wi-Fi

WLAN Setup and Connection

Connect phone to camera's Wi-Fi (MV+ID) for initial setup.

Add Device via App

Open V380 app, add new device using camera's ID.

Set Device Password

Optionally set a password for the device for security.

Device Operation

Device ID Verification

Ensure the device ID in the app matches the camera's body.

Viewing Live Video

Click to play the video feed after setup completion.

Remote Monitoring

Access 'DEVICE' section for remote monitoring via Wi-Fi or cellular.

Network Settings

Station Mode Configuration

Select 'Station mode' to connect to your home Wi-Fi network.

Wi-Fi Network Selection

Choose your Wi-Fi network from the list and enter the password.

Network Compatibility Tips

Avoid 5G Wi-Fi; use alphanumeric names for Wi-Fi. Troubleshoot app reinstallation.