To Next PageTo Next Page
Need help?Do you have a question about the MEISTER CRAFT MGS 1200 B and is the answer not in the manual?
General| Brand | MEISTER CRAFT |
|---|---|
| Model | MGS 1200 B |
| Category | Saw |
| Language | English |
Specifies the required 230V socket, earthing contact, and minimum 10A fuse.
Warns against rain, damp environments, and specifies saw blade types and workpiece handling.
Step-by-step instructions for safely replacing the saw blade, noting left-hand thread.
Procedure to precisely set 90° and 45° angles for accurate cuts.
Instructions for setting vertical and horizontal mitre cuts using angle locks and knobs.
Ensuring dry, well-lit environment, bolting machine, and feeding the saw head correctly.
Procedure for starting the saw, reaching speed, and safely stopping the operation.
Safety checks, avoiding overload, using correct saw blades, and handling wood dust.
Advice on wood blade suitability, beech/oak dust hazards, and using dust extractors.
Proper hand placement to avoid the blade and clamping workpieces for trimming.
Techniques for sawing bent/round pieces and working with shaped strips.
Instructions for cleaning ventilation slits, chip ejector, and securing the saw for transport/storage.
Guidance on automatic motor shut-off due to worn brushes and replacement procedure.
Tips for protecting saw blades from corrosion, cleaning residues, and reducing noise.
Instructions for environmentally friendly disposal of unusable power tools and packaging.
Information on storing instructions, cleaning, sending for repair, and liability for damage.
