62
1 – Scope of delivery
• 1 spray gun with paint tank
• 1 spray nozzle extension
• 1 viscosity beaker
• 1 replacement nozzle 0.8 mm
• 1 cleaning needle
• Operating Instructions
• Guarantee
2 – Technical information
Technical data
Current supply 230 V~/50/60 Hz
140 bar
Rated power
requirement 60 W
Discharge capacity 240 g/min
Paint tank 800 ml
Nozzle diam. 0,5 mm
Power cord 250 cm
Weight 1,5 kg
Technical changes reserved.
Noise emission/vibration
Noise emission
L
pA
: 81,8 dB(A), L
WA
: 94,8 dB(A)
Measuring inaccuracy:
K
pA
: 3.0 dB(A), K
WA
: 3.0 dB(A)
Hand/arm vibrations
a
wh
: 11,0 m/s
2
;
Measuring inaccuracy K: 1.5 m/s
2
Noise/vibration information
Measured values determined in
accordance with EN 60745
• The specified vibration emission value
was measured in accordance with a
standardised test procedure and can
be used in order to compare one
electrical tool with another.
• The specified vibration emission value
can also be used for an introductory
evaluation of the exposure.
Page
1 – Scope of delivery 62
2 – Technical information 62
3 – Components 63
4 – Correct use 63
5 – General safety
instructions 64
6 – Safety instructions
relating specifically to
the equipment 66
Page
7 – Handling instructions/
Preliminary work 68
8 – Mode of operation 69
9 – Maintenance and
environmental
protection 70
10 – Service instructions 71
Contents
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating
instructions must also be included!
GB
To Next Page
Loading...