• The specified vibration emission value
can also be used for an introductory
evaluation of the exposure.
• The vibration emission value may fluc-
tuate from the specified value during
actual use of the power tool. These
fluctuations will depend on the way in
which the power tool is used.
• All parts of the operating cycle must
be taken into account for this purpose
(for example, also including times in
which the power tool is switched off
and times in which it is switched on,
but is running without load). In order
to prevent the risks caused by vibra-
tions,
• Wear gloves when using;
• Limit working times and shorten the
actual operating time. Safety measures
must be taken in order to protect the
operator. As a result, the evaluation
of the influence must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the power tool is switched off
and times in which it is switched on,
but is running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise-intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute mini-
mum.
CAUTION! The effects of noise
may cause damage to your hear-
ing. Only ever work with suitable ear
defenders. Anybody else in the vicini-
ty should thus also wear ear defend-
ers.
3 – Components
1 Selection knob for drilling/
chasing
2 Gear oil filler opening
3 On/Off switch
4 On/Off switch for hammer action
5 Additional handle
6 Depth stop
7 Drill chuck
7a Holding sleeve
8 Flange wrench
4 – Correct use
This rotary hammer is suitable for
drilling and hammer-drilling concrete,
stone, masonry and light chiselling
work around the house. Use only suit-
able accessories (note manufacturer’s
instructions). All other applications
are expressly excluded. Drill chuck suit-
able for tools according to the
SDS+ system.
The machine is intended only for use in
the household.
5 – General safety instruc-
tions for handling power
tools
WARNING! Read all safety warn-
ings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cord-
less) power tool.
32
5402860-Pneu-Bohrhammer-man.indd 325402860-Pneu-Bohrhammer-man.indd 32 09.05.23 14:2109.05.23 14:21
To Next Page
