Need help?Do you have a question about the Meistergram PRO 150 Series and is the answer not in the manual?
Primary operational and safety controls for the embroidery machine.
Controls for turning the machine on/off.
Steps for first-time startup and reference point configuration.
Resuming operation after power interruption.
Main screen elements and operational icons.
Explanation of the machine's control panel buttons.
Accessing design files and general machine settings.
Functions for float, rotate, mirror, trim, and color modes.
Displays detailed design and machine status.
Icons indicating machine operational states.
Icons for sewing readiness, color, design movement, and speed.
Icons for needle position, orientation, and repeat/cycle modes.
Icons for machine stopping, thread breaks, and running states.
Sets the machine to begin sewing when the Start button is pressed.
Allows frame movement without stitching.
Executes automatic thread trimming.
Changes the active needle for embroidery.
Alters the orientation of the embroidery design.
Navigates the frame back to the design's origin.
Determines how the machine handles color changes.
Importing embroidery designs via USB flash drive.
Choosing a design from memory for embroidery.
Adjusting settings like scale and rotation for a design.
Managing the order of needle changes for design colors.
Previewing and removing embroidery designs from memory.
Outlining design perimeter and navigating within a design.
Automatic indication and handling of thread breaks.
Procedure for backing up the machine after a fault.
General| Needle Threader | Automatic |
|---|---|
| LCD Screen | Yes |
| Needles | 1 |
| Speed Control | Adjustable |
| Warranty | 25 years |
To Next Page