8 - 9
Service and
operating instructions
Even though MeisterSinger is not fussy about the passing of
time, we do maintain the quality of our watches carefully and
thoroughly. Precise Swiss movements, protected by high-ca-
liber stainless-steel casings, ensure the highest accuracy of
timekeeping. To ensure that every watch is one of a kind, an
individual serial number is assigned to each one.
In order for you to enjoy your watch, for at least as many
decades as the research taken to produce it, here are some
tips for the care and maintenance of your MeisterSinger.
Winding a watch with manual winding movement
Wind the crown on the side of the case back and forth until
you feel a slight resistance. The watch will be most accurate
when it is wound once per day. Make it your daily ritual.
Winding an automatic watch
The crown lies in the resting position on the case. Get the
movement of the watch mechanism underway by twisting
the crown back and forth approximately 15 times. The
further winding of the automatic watch is done by the move
-
ments of everyday life. Theoretically you should only have
to wind an automatic watch once. Should it wind down to a
stop through not being worn, please set it in motion again by
To Next Page
Loading...