Assembly Instructions
for the Melasty TKM1-2PS
Portable Milking Machine
315 E. Banks St Glennville, GA
Your machine doesn’t need oil.
The vacuum pump is dry and
works with graphite pallets or
vanes that you will have to
replace every 6 or 8 months. It is
important to clean your machine
before using it. You can go to our
You Tube Channel “Mitty
Supply” and watch the video on
how to clean and disinfect your
machine prior to use.
Once your machine is cleaned
and ready to use, the first step
that you need to take is to adjust
your vacuum regulator.
Please notice that the latches
around the milk bucket are for the
metal transport lid, not for the
milking lid with the black gasket.
Once you have made all
of the connections to the
3E milking lids, please
continue to the brochure
“How to Start Milking
for the First Time.”
To make all of the connections to the
3E milking lids, please go to the page
titled, “HOW TO CONNECT THE
HOSES, BLACK PLUG AND
COW PULSATOR TO THE
MILKING LIDS.”
To Next Page
Need help?
General
