1. Unpack the machine, removing all
contents. Take everything out of the
box and milking bucket and stand the
metal frame up.
2. Take the 2 stainless steel buckets and
put one on each side, inside the metal
rings. The machine came with a black
plug. Insert it into one of the nozzles on
the bucket 3E lid on the right.
3. Insert the gauge on the top of the
rubber mount located on top of the
air tank. Locate the hole on the
back of the air tank and screw in
the handle.
Black Plug
5. Hang the cluster on the hook that
is located on the back of the air
tank.
5. On the 3E lid, under the air hose,
connect the milk stopper to avoid
spills.
4. The air hose will attach from the
frame of the machine to one of the
entrances on the lid.
To Next Page
Loading...