How to troubleshoot a MELING BIOMEDICAL YC-75L Refrigerator that does not work?
If your MELING BIOMEDICAL Refrigerator isn't working, first ensure the outlet is energized and the power plug is securely plugged in. Check that the power fuse is not disconnected. Also, verify that the supply voltage is appropriate.
What to do if the MELING BIOMEDICAL YC-75L temperature does not reach the set value?
If the temperature in your MELING BIOMEDICAL Refrigerator does not reach the set value, make sure the door is closed tightly and avoid opening it frequently within a short period. Also, avoid putting too many items inside at once and ensure the ambient temperature is not too high.
Why is the compressor not running on my MELING BIOMEDICAL YC-75L Refrigerator?
If the compressor of your MELING BIOMEDICAL Refrigerator isn't running, ensure that the temperature is set correctly. Also, check whether the temperature inside the cabinet is too low.
How to reduce noise from a MELING BIOMEDICAL YC-75L Refrigerator?
If your MELING BIOMEDICAL Refrigerator is making a high noise, ensure that the cabinet is placed on a flat surface and that it is not in contact with the wall.
Why is there condensation on my MELING BIOMEDICAL YC-75L Refrigerator?
If you notice condensation on the surface of your MELING BIOMEDICAL Refrigerator during rainy and humid seasons, this is normal. Wipe it off with a dry cloth.
How to get rid of an odor in a MELING BIOMEDICAL Refrigerator?
If your MELING BIOMEDICAL Refrigerator has an undesirable odor, it needs to be cleaned. Also, make sure that items with strong smells are properly packed.
What to do if there is lighting damage in MELING BIOMEDICAL YC-75L?
For lighting damage in MELING BIOMEDICAL refrigeration equipment, please call the after-sales telephone and contact after-sales service personnel of MELING BIOMEDICAL for replacement. Please do not replace the parts by yourself.
Specifies ideal ambient conditions for equipment placement and operation.
Outlines requirements for the installation location, floor, and ventilation.
Details steps like unpacking, accessory check, cleaning, and handle/fixing plate installation.
Provides step-by-step instructions for initial equipment startup after installation.
Instructions on how the equipment behaves and what to do after a power interruption.
Explains the functions and indicators of the control panel for Type A.
Describes additional features like printer, remote alarm terminal, and chart recorder.
Covers cleaning, defrosting, and condenser maintenance procedures.
Provides guidance on deactivation and scrapping of the equipment.
Details battery maintenance, replacement, and recovery procedures.
General| Capacity | 75L |
|---|---|
| Climate Class | N |
| Defrosting | Manual |
| Display | LED |
| Power Supply | 220V/50Hz |
| Controller | Microprocessor |
| External Material | Steel |
| Power Consumption | 0.8kWh/24h |
To Next Page