How to fix Melitta Coffee Maker when coffee only flows drop by drop?
If coffee only flows drop by drop from your Melitta Coffee Maker, the grinding fineness might be too fine. Try setting the grinding fineness coarser. Also, clean the brewing unit. If the issue persists, run the integrated descaling and cleaning programs.
Why is my Melitta Caffeo Solo & MilkE 953-10x Coffee Maker not dispensing coffee?
If coffee does not flow from your Melitta Coffee Maker, first ensure the water tank is filled and correctly inserted. Open the valve until water flows out of the appliance and then close it again. Another possible cause is an obstructed brewing unit, which needs cleaning.
What to do if Melitta Coffee Maker doesn't make enough milk froth?
If your Melitta Coffee Maker isn't producing enough milk froth, check the steam pipe nozzle. Ensure it is in the correct position and clean it if it's dirty.
Why are the bean symbols flashing on my Melitta Caffeo Solo & MilkE 953-10x Coffee Maker when the container is full?
If the bean symbols are flashing on your Melitta Coffee Maker even when the bean container is full, it indicates an insufficient quantity of ground beans in the brewing chamber. Press the button for coffee dispensing or coffee strength.
What does it mean when the valve symbol illuminates out of turn on Melitta Caffeo Solo & MilkE 953-10x?
If the valve symbol illuminates unexpectedly on your Melitta Coffee Maker, it indicates air in the lines inside the appliance. Open the valve until water flows out, then close it again. If the problem continues, clean the brewing unit.
Why are the cleaning and stand-by symbols flashing alternately on my Melitta Caffeo Solo & MilkE 953-10x?
If the cleaning and stand-by symbols flash alternately on your Melitta Coffee Maker, it means the brewing unit is either missing or not properly inserted. Ensure it is correctly inserted. Another cause may be that the brewing chamber is overfilled. To resolve this, switch the appliance off and on again via the ON/OFF button (repeat if necessary) until standby mode is displayed.
How to reinsert the brewing unit in Melitta Caffeo Solo & MilkE 953-10x?
If you cannot reinsert the brewing unit into your Melitta Coffee Maker, first check if the handle for locking the brewing unit is correctly engaged. If that doesn't work, the actuator might not be in the proper position. Switch the appliance off and on again, then simultaneously press the button for coffee dispensing and steam dispensing for more than 2 seconds. The actuator moves into position. Then reinsert the brewing unit and make sure it is correctly locked into place.
Why is the grinder not grinding coffee beans in my Melitta Caffeo Solo & MilkE 953-10x?
If the grinder in your Melitta Coffee Maker isn't grinding beans, it could be that the beans are not dropping into the grinder, possibly because they are too oily. Try tapping lightly on the bean container. If this doesn't help, there might be foreign objects in the grinder.
What to do if all buttons are flashing on Melitta Coffee Maker?
If all buttons on your Melitta Coffee Maker are flashing continuously, it indicates a system error. Try switching the appliance off and on again using the ON/OFF button.
General| Type | Fully Automatic Coffee Machine |
|---|---|
| Dimensions (W x D x H) | 20 x 45.5 x 32.5 cm |
| Weight | 8.5 kg |
| Water Tank Capacity | 1.2 L |
| Coffee Bean Container Capacity | 125 g |
| Milk System | Integrated milk frother |
| Power Consumption | 1400 W |
| Pump Pressure | 15 bar |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Adjustable Coffee Amount | Yes |
| Adjustable Water Hardness | Yes |
| Automatic Shut-Off | Yes |
| Programmable | No |
| Hot Water Function | Yes |
| Automatic Rinsing and Cleaning | Yes |
| Adjustable Coffee Temperature | Yes (3 levels) |
| Adjustable Milk Temperature | No |
| Adjustable Milk Froth | No |
| Color | Black, Silver |
Details how to safely connect the appliance to a power socket.
Instructions on how to properly fill the coffee bean container with beans.
Steps for filling the water tank with fresh tap water before operation.
Procedures for the initial power-on and system venting of the appliance.
Detailed steps for removing and cleaning the brewing unit.
How to run the automatic cleaning cycle to remove residues.
Procedure to remove limescale buildup from the appliance.
To Next Page