Melitta Calibra User Manual

10
Grind programme
Preparation
method
Grind level Grind quantity Water quantity
3.1 Weight
Pour Over 6 - 26 50 bis 60 g
1000 ml
Cold Brew 6 - 26
100 g 500 ml
3.2 No. of cups Filter coee 6 - 26 6 to 8 g
Per cup
French Press 27 - 39 8 g
Per cup
3.3 Manual Espresso
1 - 5
Full portafilter
25 to 40 ml
table 2
7. Error messages in display
E01
The bean container is empty. The quantity
in the container was less than the grind
quantity set. Fill the bean container and press
the select button. This will cancel the error
message. By pressing the
button  the
grinding process continues and the remaining
grind quantity is added.
E02
The bean container is not inserted correctly.
Insert the bean container into the appliance
as described in point 5.
60
The motor has overheated due to being used
too much in a short time. To prevent further
damage to the appliance, the motor must
cool down for 60 minutes. The remaining
cooling time is shown in the display. Do not
disconnect the mains plug.
T
If
T also appears in the display, press the Tare
button  to tare the scale. If the T is still
visible, the collecting container is not in the
correct position.
8. Notes on disposal
•Appliancesmarkedwiththissymbol are subject
to the European Directive for WEEE (Waste Elec-
trical and Electronic Equipment).
•Electricalappliancesshouldnotbedisposedof
with household waste. Dispose of the device in an
environmentally friendly manner using appropriate
disposal systems.
•Packagingmaterialsarerawmaterialsandarerecy-
clable. Please recycle them.
G B
table 3

Melitta Calibra Specifications

General

Grind Settings	39
Hopper Capacity	375g
Grind Type	Burr
Power	160W
Material	Plastic
Timer	Yes
Color	Black
Type	Electric