8
in the safe use of the appliance
and have understood the hazards
involved.
•Donotallowchildrentoplay
with the appliance.
•Replacementofthepowercable
and any other repairs must
only be carried out by Melitta
®
Customer Service or an authorised
workshop.
•Useofaccessoriesnotrecom-
mended or sold by the manufac-
turer may result in fire, electric
shock, or personal injury.
•Theappliancemustnotbeused
by children. Keep the appliance
and its power cord away from
children.
2. Before rst use
•Removeallpackaging.
•Allappliancesaretestedtoensurethattheyare
in perfect working order during manufacture. As
a result, ground coee residues may remain in the
appliance.
•Placetheapplianceonadry,levelandstablesurface.
•Makesurethatthemainsvoltageinyourhousehold
corresponds to the information on the product
label on the base of the appliance.
•Connecttheappliancetothepowersupply.
3. Using the coffee grinder
The appliance has various features to ensure ease
of use and the perfect coee. These features are
explained below.
Filling with coffee beans:
•Removethelidonthebeancontainer.
•Fillthebeancontainerwiththerequiredquantityof
coee beans . The fill capacity is approx. 375 g.
•Replacethelidonthebeancontainer.
Note: The coee grinder is only suitable for
grinding coee beans. Make sure that there are no
other objects or food inside the appliance.
To ensure that the grinder works properly, do not
use caramelised coee beans. Please do not fill the
bean container with ground coee.
Set grind level:
•Dependingonyourindividualtaste,upto39
dierent grind levels can be set to suit the required
preparation method - e.g. espresso, filter coee or
French press.
•Toadjustthegrindlevel,turnthebeancontainer
with light pressure to the required position .
Depending on the preparation method, select a
grind level from fine (Fine) to coarse (Coarse).
Please refer to the following table for recommended
settings:
Method Espresso
Pour Over,
Filterkaee,
Cold Brew
French
Press
Recommended
grind level
Fine Medium
Coarse
Grind level setting
1 - 5
6 - 26 27 - 39
Choosing a grind programme:
Three different grind programmes can be selected
and are shown in the display as follows:
•
- Setting to select the coee quantity by
weight
• - Setting to select the coee quantity by number
of cups
• - Setting to select the coee quantity manually
Note: When the coee grinder is used for the first
time, the symbol for setting the coee quantity
according to weight appears on the display; you
can change the grind programme by briefly pressing
the Select button .
3.1 Setting to select the coffee quantity
by weight
•Thecoeegrinderhasanintegratedscale.Thismakes
it possible to grind the desired quantity of coee to
the gram.
•Whendelivered,thecoeequantity3gappearson
the display.
•Withthe
+
- button or the – - button a grind
quantity from 3 g to 100 g can be set. Hold the button
down to fast forward the amount .
•IfT appears on the display, the tare weight on the
scale should be set. After pressing the tare button ,
the T disappears and the preset coee quantity
remains on the display (the container must be
correctly positioned on the stainless-steel plate).
•Whenthe button is pressed the grinding
process starts.
•Thecurrentgrindquantityashesonthedisplay
during the grinding process.
•Assoonasthepresetcoeequantityweighthas
been reached, the grinder switches o. The grinding
process can be stopped at any time by pressing the
button .
•Thelastgrindquantitysetremainsstoredevenafter
unplugging from the mains power supply.
3.2 Setting to select the coffee
quantity by number of cups
•Thissettingallowsyoutoselectthecoeequantity
based on the number of cups.
•PresstheSelectbutton until the symbol
appears on the display.
•Withthe
+
button or the – button you can set
the number of cups from 1 to 10. Hold the button
down to fast forward .
•Thefactorysettingis7gpercupandcanbechanged
G B
table 1