5
Instructions For Use
1. Remove lid, making sure the whole coffee bean chamber is
empty and clean.
2. Fill top chamber with whole coffee beans using scoop.
(See Figure A) Replace the lid. (See Figure B).
NOTE: The whole bean chamber will hold up to 8-oz. of
coffee b e a n s, which is approximately the amount for three
12-cup cara fes of coffe e.
3 . Place the ground coffee chamber (lower chamber) into position in
the mill, making sure it snaps securely in place.(See Figure C).
4. Plug the cord into a 120V ~ 60Hz outlet.
5. Set the variable grind selector on the left side of the unit.(See
Figure D) There are 18 settings, the lower the setting, the
coarser the grind. The higher the setting, the finer the grind.
For espresso, use settings 16 - 18. After using the appliance
a few times, you can determine the proper setting to suit your
own taste.
6. Start the coffee mill by pressing the automatic selector timer
button for the number of cups you wish to gri n d .(See Figure E)
7. The coffee mill will grind the desired amount of coffee and will
then switch off automatically.
NOTE: If you want to switch off the appliance before the
programmed time elapses, push the OFF button.
8. Remove the ground coffee chamber and spoon ground coffee
into coffee filter.
9. Unplug the coffee mill. See Care and Cleaning.
Figure A Figure B
Figure E Figure F Figure G
Figure C Figure D
To Next Page
Loading...
Need help?
General
