Melitta One:One MES2B - Before Using Your One:One; Initial Cleaning and Priming

6
Before Using Your
One:One
™
Pod Brewing System
Become familiar with all parts of the appliance.
Keep your One:One clean
Clean and descale your One:One
™
on a regular basis. See “Clean-
ing and Descaling”, pages 12-13. We recommend cleaning the
Water Tank and the Drip Spout(s) as well as the Pod Holder(s),
before using your One:One
™
for the first time. Turn on the machine
for a full cycle using water only by following steps 1-7 below.
IMPORTANT: THE MACHINE WILL NOT FILTER COFFEE OR TEA
UNLESS THE PUMP HAS BEEN PRIMED.
1
. Remove the Water Tank by pulling out and then up to remove
from the Base, see Figure 4.
FIGURE 4