9
8. Press the Power Light/Indicator Button to turn power on, then
simultaneously press the 5-Ounce Serving and 8-Ounce Serving
Buttons, see Figure 9.
The water from the Water Tank will cycle through the One:One
™
.
Note: If unit goes unused for 3 or more days, please repeat above
process (steps 1-7).
CAUTION: Do not immerse cord, plug or machine in water or other
liquid.
Brewing Coffee or Tea
CAUTION: Before Brewing in your One:One
™
for the first time,
complete the steps listed under “Before Using Your One:One
™
Pod Brewing System” on pages 6-9 to ensure your machine
functions properly.
1. Fill the Water Tank with water up to the ‘MAX’ line. Never pour
other liquids such as milk or hot water into the Water Tank. A
full tank will yield up to 24-ounces of coffee or tea (three mugs).
2. Press the Power Light/Indicator Button.The indicator light will
flash while the water heats up. Heating will take approximately
1
1/2 minutes.
3. To open the Lid, place one finger behind Lever and pull out.
Gently raise Lid to open position.
4. Place the appropriate spout, coffee, hot or ice tea, inside the
One:One
™
.
FIGURE 9
To Next Page
Loading...
Need help?
General
