How to fix “Add Water” indicator on Mellerware ICE MASTER?
If the “Add Water” indicator is on for your Mellerware Ice Maker, it means there's not enough water in the reservoir. To fix this, switch off the ice maker, fill the water reservoir, and then press the “ON/OFF” button to restart the unit.
What to do if the water shortage light is on my Mellerware Ice Maker?
If the water shortage light is on for your Mellerware Ice Maker, it means there is no water in the tank or the pump is full of air. Press the stop button, fill with water, and press the on button to restart. Once the water reaches the fill line, the ice maker will automatically turn on.
Why are ice cubes sticking together in my Mellerware Ice Maker?
Ice cubes may stick together in your Mellerware Ice Maker if the water temperature in the inner tank is too low or if the room/water temperature is too high. Here are a few things to try: * Stop the ice maker and restart it when the ice blocks melt. Select the small size ice cube selection. * Replace the water. The water temperature should be between 8-22°C, and the room temperature should be between 10-35°C.
What does it mean when the full ice and defective lights are both on my Mellerware ICE MASTER Ice Maker?
If both the full ice and defective lights are illuminated on your Mellerware Ice Maker, it indicates that the water tank is blocked with an ice block. Remove the ice block under the ice shovel, unplug the unit, plug it back in, and press the on/off button. The machine should automatically restart after two minutes.
Why is my Mellerware Ice Maker compressor buzzing?
If the compressor in your Mellerware Ice Maker is working abnormally and making a buzzing sound, it could be because the mains power is lower than recommended. Stop the ice maker and do not turn it on again until the mains power returns to normal.
Why is my Mellerware Ice Maker not making ice?
If your Mellerware Ice Maker's cycle appears normal but no ice is forming, it could be due to a refrigerant leak or a blockage in the cooling system's pipe. Return the product to a service center to be verified by a qualified technician.
What to do if Mellerware ICE MASTER Ice Maker runs continuously but the water is warmer than normal?
If your Mellerware Ice Maker runs continuously, but the water is warmer than normal, the magnetic valve may be defective. Replace the magnetic valve.
Guidelines for safe operation and placement of the appliance in its working area.
Precautions to protect individuals from harm during appliance operation and handling.
Instructions on how to use and maintain the ice maker for optimal performance and longevity.
Steps and precautions to take before operating the ice maker for the very first time.
Details on operating the control panel and understanding indicator lights for daily use.
Step-by-step guide on how to operate the ice maker from filling water to producing ice.
Procedures for safely shutting down, unplugging, and cleaning the ice maker after use.
Details of the 12-month warranty for defects due to faulty parts or workmanship.
Details of the additional 12-month warranty for defects due to faulty material or workmanship.
Checklist and conditions to follow before returning the product for warranty service.
Information on service availability and costs for repairs needed outside the warranty period.
Benefits and importance of registering the product warranty online for extended coverage.
Step-by-step guide on creating a user profile and registering the product warranty online.
General| Brand | Mellerware |
|---|---|
| Model | ICE MASTER |
| Ice Making Capacity | 12 kg / 24 h |
| Power Supply | 220-240V/50Hz |
| Product Type | Ice Maker |
| Ice Shape | Bullet |
| Water Tank Capacity | 2.2 Liters |
| Color | Silver |
| Control Type | Electronic |
To Next Page
