What to do if the “Ice Full” indicator is on in my Mellerware ICE MASTER ICM001BKA Ice Maker?
If the “Ice Full” indicator is illuminated on your Mellerware Ice Maker, it means the ice basket is full. Remove the ice from the basket and replace the empty basket immediately. This prevents the next batch of ice from falling into the water reservoir.
Why is the “Add Water” indicator on my Mellerware ICE MASTER ICM001BKA Ice Maker, and how to fix it?
If the “Add Water” indicator is on, it means there is little water in the water reservoir. To resolve this, switch off the Mellerware Ice Maker, fill the water reservoir, and press the “ON/OFF” button again to restart the unit.
Why is my Mellerware ICE MASTER ICM001BKA cycle normal but no ice is formed?
There could be several reasons why your Mellerware Ice Maker is making ice, but no ice is being formed: * The room or water temperature in the inner tank might be too high. * The refrigerant in the cooling system may be leaking and you should return product to service center to be verified by a qualified technician. * A pipe in the cooling system could be blocked and you should return product to service center to be verified by a qualified technician.
How to prevent ice cubes from sticking together in my Mellerware Ice Maker?
Ice cubes may stick together because: 1. The ice-making cycle is too long. Stop the Mellerware Ice Maker and restart it when the ice blocks melt. Select the small size ice cube selection. 2. The water temperature in the inner tank is too low. Replace the water with water that is between 8-22 C. Ensure the room temperature is between 10-35 C and the water temperature is between 8-22 C.
General| Brand | Mellerware |
|---|---|
| Model | ICE MASTER ICM001BKA |
| Category | Ice Maker |
| Language | English |
To Next Page
