What to do if my Melody DARK 300B has no sound?
If your Melody Amplifier isn't producing any sound, the issue might stem from disconnected or incorrectly connected cords, or an incorrect input selector setting. Please verify that the connecting cords are properly connected to the terminals. Also, ensure the input selector matches the component you intend to use for playback.
Why is there no sound from one speaker on my Melody DARK 300B?
If you're experiencing sound from only one speaker with your Melody Amplifier, the connecting cords or speaker cords may be disconnected on the affected side. Please check the cables between the amplifier and the speaker, ensuring they are securely connected with correct polarity.
General| Input Impedance | 100kΩ |
|---|---|
| Output Impedance | 4Ω, 8Ω |
| Input Sensitivity | 300mV |
| Power Consumption | 180W |
| Type | Integrated Amplifier |
| Tubes | 2x 300B, 2x 6SN7 |
| Frequency Response | 20Hz - 20kHz |
| THD | <1% (1kHz, 1W) |
To Next Page