EasyManua.ls Logo

Member's Mark Hickory Hardtop User Manual

Member's Mark Hickory Hardtop
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hickory Hardtop Grill Gazebo
Owner’s Manual
WARNING:
z Do not assemble this item alone. 3 peoples are recommended for safe assembly.
z Keep all children and pets away from assembly area. Children and pets should be supervised when
they are in the area of the Gazebo construction.
z Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
z Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to the product.
Please read all instructions before assembly and use.
z Check all bolts for tightness before use and periodically check and tighten bolts as necessary.
z Assemble on level ground.
z For outdoor use only.
z Anchor the gazebo to the ground with stakes for added safety. Stakes are provided to secure the
gazebo in
the ground. If you wish to secure the gazebo to a concrete and wood surfaces, use anchors
suited for these surfaces (anchors not included).
Congratulations on your purchase of Hickory Hardtop Grill Gazebo. Our clear, easy to
follow, step-by-step instructions will guide you through the assembly process from start to finish.
Question and Answer IconNeed help?

Do you have a question about the Member's Mark Hickory Hardtop and is the answer not in the manual?

Member's Mark Hickory Hardtop Specifications

General IconGeneral
BrandMember's Mark
ModelHickory Hardtop
CategoryOutdoor Furnishing
LanguageEnglish

Summary

General Safety Warnings

Assembly Safety Guidelines

Ensures safe assembly by specifying personnel, area clearance, and handling of parts.

Safety Information

Step 1: Assembly of Post and Slant Beam End For Big Roof

Step 2: Assembly of Long Frame

Step 3: Assembly of Middle Beam End For Big Roof

Step 4: Assembly of Frame

Step 5: Assembly of Front Frame For Table and Side Frame For Table

Step 6: Assembly of Table Top

Step 7: Assembly of Bottom Frame For Table

Step 8: Assembly of Table

Step 9: Assembly of Support Brace

Step 10: Assembly of Big Top Frame

Step 11: Assembly of Slant Beam For Big Roof

Step 12: Assembly of Middle Beam For Big Roof

Step 13: Assembly of Slant Beam For small Roof

Step 14: Assembly of Small Top

Step 15: Assembly of Small Top Cover Plate and Hook

Step 16: Assembly of Right Cover Sheet With Small Top (Long Side)

Step 17: Assembly of Cover Sheet With Small Top (Short Side)

Step 18: Assembly of Press Pieces (Long and Short)

Step 19: Assembly of Small Top Cover Plate (Slant)

Step 20: Assembly of Small Top Cover Plate

Step 21: Assembly of Big Top Beam (Long Side)

Step 22: Assembly of Big Top Blocked (Long Side)

Step 23: Assembly of Big Top Beam (Short Side)

Step 24: Assembly of Big Top Blocked (Short Side)

Step 25: Assembly of Big Top Cover Piece (Set 1)

Step 26: Assembly of Big Top Cover Piece (Set 2)

Step 27: Assembly of Press Pieces (Middle and Short)

Step 28: Assembly of Big Top Cover Plate

Step 29: Assembly of Stake

Related product manuals