Member's Mark RF400A - Page 2

Item
1.1 ZG button⑶
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of movingto memory positions, the head and foot actuatorsmove first,
then the tilt and lumbar actuators move;
1.2 AntiSnore button⑺
Click AntiSnore button, actuators move to AntiSnore position, stop when click any button
during movement；
Press and hold
AntiSnore button for 5s, timer LED of remote flashes, the control box records
current position as
AntiSnore position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.3 Head up⑴
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released；
1.4 Head down⑵
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
1.5 Foot up⑷
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.6 foot down⑸
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;