Member's Mark TGC0P4724D01

Need help?

Do you have a question about the Member's Mark TGC0P4724D01 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is an Assembly Instructions & User's Manual for a Member's Mark 12 FT VIRGINIA PINE artificial Christmas tree, model number TGC0P4724D01.

Function Description:

The Member's Mark 12 FT VIRGINIA PINE is a pre-lit artificial Christmas tree designed for indoor seasonal decorative use. It features multiple sections that are assembled to form the complete tree, and it includes integrated lighting with various display functions controlled by a remote. The tree is not intended for permanent installation or outdoor use unless specifically marked. It is equipped with push-in type lamps and includes a light controller with eight different lighting functions.

Important Technical Specifications:

Model Number: TGC0P4724D01
Input: AC120V, 60Hz, 0.45A, 54W
Output: DC 29V, 0.9A, 26.1W
Controller: 0.9A
Battery for Remote Controller: CR2032 (lithium battery)

Usage Features:

Assembly: The tree consists of multiple numbered sections (1 through 6 and a Tree Top) that are stacked vertically onto a tree stand. Each section is identified by a sticker. The assembly process involves connecting the sections and ensuring electrical connections are made between them.
Lighting Functions: The tree is pre-lit and comes with a remote control and a light controller. The remote control allows selection from eight different light functions:
1. FADES FROM CLEAR TO MULTI COLOR (REPEATS)
2. CLEAR FADING ON AND OFF (REPEATS)
3. ALTERNATES FROM CLEAR TO MULTI COLOR (REPEATS)
4. STEADY ON CLEAR
5. SLOW FADE FROM CLEAR TO MULTI COLOR (REPEATS)
6. STEADY ON MULTI COLOR
7. MULTI COLOR FADING ON AND OFF (REPEATS)
8. COMBINATION OF ABOVE (REPEATS)
Remote Control: The remote control facilitates easy switching between the lighting modes. It requires a CR2032 lithium battery, which is not included in the package, and a screwdriver is needed for battery replacement.
Safety Precautions:
- Always read and follow all safety instructions provided in the manual and on the product.
- Do not use outdoors unless marked suitable. If used outdoors, connect to a Ground Fault Circuit Interrupting (GFCI) outlet.
- Not intended for permanent installation.
- Avoid placing near heat sources like gas or electric heaters, fireplaces, or candles.
- Do not secure wiring with staples or nails.
- Unplug the product when leaving the house, retiring for the night, or if left unattended.
- This product is for decorative use only and is not a toy; keep out of reach of small children.
- Do not hang ornaments from cords or wires.
- Do not close doors or windows on the product or extension cords.
- Do not cover the product with cloth, paper, or any non-product material when in use.
- Do not twist lamps.
Troubleshooting:
- If the tree does not illuminate, check all connectors, ensure the cord is firmly plugged into the wall outlet (or foot pedal if applicable), and inspect for loose connections, broken, or missing light bulbs.
- For loose hinge pins, extra pins and retainer washers are provided for repair. Place the branch into the bracket slot, insert a new hinge pin, and secure with the retainer washer.

Maintenance Features:

Pre-Use Inspection: Before using or reusing, carefully inspect the product for any cut, damaged, or frayed wire insulation or cords, cracks in lampholders or enclosures, loose connections, or exposed copper wire. Discard any damaged products.
Storage Instructions:
1. Unplug the adapter and remove all ornaments and decorations.
2. Disassemble the tree from top to bottom, gently lifting each section and folding branches toward the pole.
3. Remove the bottom section from the tree stand.
4. Cover the protective caps on the poles to prevent damage to internal parts.
5. Carefully place all tree sections into a storage bag (if included) or the original packing box. For optimal fit, lay sections facing opposite directions with poles towards the middle, placing the treetop section last in the middle before zipping up.
6. Store the tree in a cool, dry location protected from sunlight when not in use. Excessive heat or humidity can damage the tree.
Battery Maintenance (Remote Control):
- Keep small parts (batteries) out of reach of children.
- Do not expose the remote controller to moisture.
- Dispose of used batteries properly according to local laws and regulations.
- Clean battery contact surfaces before installation.
- Do not mix old and new batteries, or different types of batteries (alkaline, standard, lithium, rechargeable).
- Remove batteries when not used for extended periods or when depleted.
- Use only CR2032 batteries.
- Do not dispose of batteries in fire as they may leak or rupture.
- Non-rechargeable batteries should not be recharged.
- Be aware that lithium batteries, due to their small size, can be swallowed by children, which can cause death.
Spare Parts: The manual lists the following spare parts:
- Hinge Pin Retainer: Quantity 1
- Hinge pin: Quantity 1
- Bulb: Quantity 32

Customer assistance for spare/replacement parts is available via www.polygroupstore.com or by calling +1 (888) 919-0070. Additional assistance is available at samsclub.com/membersmarkhelp.