This document is an assembly and user manual for the Member's Mark Concrete Umbrella Base, model number UBS103007B. It provides instructions for assembly, care, use, storage, and warranty information for the product.
Function Description:
The Member's Mark Concrete Umbrella Base is designed to provide a stable foundation for an outdoor umbrella. It features a central pole assembly that can accommodate umbrella poles of various diameters, allowing for versatile use with different umbrella types. The base is constructed from concrete, providing significant weight for stability, and includes components for adjusting the height and securing the umbrella pole. It is suitable for freestanding use or in conjunction with a patio table, offering two height options to fit under tables.
Important Technical Specifications:
- Model Number: UBS103007B
- Dimensions: 20.47" x 21.06” x 19.29” (52cm x 53.5cm x 49cm)
- Material:
- Umbrella Pole Diameter Accommodation: The Top Tube (C) and Bottom Tube (D) assembly can accommodate umbrella pole diameters up to 1.88in/4.8cm, 1.49in/3.8cm, and 1.33in/3.4cm by switching the Collar (A).
- Warranty: 3 years guarantee against defects in material and/or workmanship.
Usage Features:
- Adjustable Pole Diameter: The umbrella base is designed with a removable collar (A) that allows it to fit umbrella poles of three different diameters: 1.88 inches (4.8 cm), 1.49 inches (3.8 cm), and 1.33 inches (3.4 cm). This ensures compatibility with a wide range of umbrellas.
- Two Height Options: The assembly offers two distinct height configurations. One option is for freestanding use, providing a taller setup. The second, lower height option, is specifically designed for use with patio tables, allowing the umbrella base to sit underneath the table while the umbrella pole passes through the table's center hole.
- Secure Fastening: The base utilizes two knobs (B) to securely tighten and hold the umbrella pole in place within the top tube assembly, preventing wobbling or accidental dislodging.
- Easy Assembly: The manual outlines a straightforward two-step assembly process, primarily involving connecting the collar, top tube, bottom tube, and knobs to the concrete base.
- Customer Support: Assistance for spare/replacement parts and general inquiries is available via a toll-free number (1-888-690-9800) and email (cs@sunvillahome.com). An online help portal (samsclub.com/membersmarkhelp) is also provided for questions and comments.
Maintenance Features:
- Cleaning: The product should be cleaned using a soft, clean cloth that will not scratch the surface.
- Dusting: Regular dusting is recommended, and a vacuum cleaner crevice tool can be used to clean between seams.
- Heat Protection: To prevent damage, the furniture (including the umbrella base) should be kept at least 60cm (2ft) away from heat sources.
- Hardware Check: Periodically, all connections and fasteners should be checked to ensure they remain tight, as hardware can loosen over time.
- Storage:
- When not in use, the components should be carefully placed back into the original shipping box or a provided container and sealed.
- The item should be stored in a cool, dry place, away from direct sunlight.
- Exposure to excessive heat or humidity can damage the item.
- Recycling: The manual encourages users to consider recycling all applicable packaging material, promoting environmental responsibility.
- Read all instructions carefully before assembly.
- Assembly by an adult is strongly recommended for safety.
- Only use vendor-supplied hardware to maintain structural integrity. Unauthorized hardware can compromise the product's safety.
- Do not use power tools for assembly unless explicitly stated in the manual, as they can damage fasteners, hardware, or components.
- Do not fully tighten all fasteners/screws until all parts are in place to prevent misalignment during assembly.
- Ensure all parts and hardware are removed from the box and placed on a soft, scratch-free surface (like carpet) to prevent damage during assembly. The shipping box can serve as a work surface.
- Do not discard any packaging or contents until assembly is complete to avoid accidentally losing small components or hardware.
To Next Page
Need help?
General
