Membrane Solutions MSA3 - Warranty; Getting Started; Introduction

Commissioning the system
Step 1
Before using the air purifier for the first
time, open the panel and remove the
composite filter. Make sure to remove any
packaging from the filter element, or the
product will not function correctly.
Step 2
Plug the air purifier power plug into an
electrical outlet.
The purifier should now be in standby mode.
Step 3
Push the power button once to turn the air
purifier on.
The purifier should now be in operating
mode.
Operating Guide
Control Panel
Power Button
Press the Power button to put the air purifier
into operating mode.
Press the power button a second time to stop
the air purifier and place it into standby mode.
Fan Speed
Press the fan button repeatedly to cycle through
the different speed settings.
Sleep – Low speed
2 – Medium speed
3 – High Speed
The corresponding fan speed indicator light will
display the current fan speed.
Lock
To lock the system, press and hold the lock
button for 3 seconds until the lock display is
illuminated.
To unlock the system, press and hold the lock
button until the indicator light turns off.
6
7