Avire 2G GSM Gateway
Installation Guide
Product Part No. 452 002/M
LED
The Avire 2G GSM gateway has 2 LEDs that indicate the device status
LED STATUS DESCRIPTION
Status
OFF
Fast Blinking
Power supply not connected
Power supply connected
GSM
OFF
Slow Blinking
ON
Fast Blinking
GSM Network Searching, Low GSM Signal Level, SIM card not present, PIN not inserted
Good GSM Signal Level
Very Good GSM Signal Level
Roaming Services
The Avire 2G GSM Terminal provides the interface between the Memcom
+
Lift Emergency telephone and the mobile
telephone network. This guide assumes that the Memcom
+
has already been installed. The installer/customer needs to
provide a suitable SIM card.
Ref no. 452 862 (ML) Version 2
To Next Page
Need help?
General