Memco C100 Series User Manual

Memco
®
C100
Base Variants 1 and 2
Ref No. C100 851 (ML) Version 4
Dimensions (mm)
This Base 2 variant of the product can be installed
behind the COP and has an integrated relay, LED
indicators and an inductive loop.
The Memco C100 is a COP based emergency telephone system. It has been designed to provide quick and easy COP
installation and is also the rst emergency telephone that can be programmed at the touch of a button, making the
programming process quicker and easier than ever.
Installation Guide
Model No. C100 BASE1
This Base1 variant of the product can be installed
behind the COP and has an integrated relay and LED
indicators.
Model No. C100 BASE2

Memco C100 Series Specifications

General

Brand	Memco
Model	C100 Series
Category	Telephone System
Language	English

Summary

Memco C100 Base Variants Overview

C100 BASE1 Variant

Describes the BASE1 model, its integrated relay and LED indicators.

C100 BASE2 Variant

Describes the BASE2 model, its integrated relay, LED indicators, and inductive loop.

C100 Base Dimensions

Provides physical dimensions and mounting hole specifications for the unit.

C100 Unit Connections

Main Unit Connections

Details all available connections on the C100 BASE1 and BASE2 units.

External Pictogram Connections

Explains how to connect external pictograms powered by an independent supply.

Installation and Initial Setup

Fixing the Unit Behind the COP

Step-by-step guide for drilling holes and mounting the unit.

One-Touch Programming

Describes the process of programming the unit using a programming tool.

Programming Menu Navigation

Menu Controls Overview

Explains the keypad controls for navigating the programming menu.

Quickstart Menu Options

Details the first 7 menu options for quick system setup.

Detailed Programming Options

Tel. Numbers Configuration

Setup of alarm and technical telephone numbers with protocol selection.

Call Attempt Settings

Configuration of the number of attempts the unit makes to contact each telephone number.

System Configuration and Settings

System Configuration Options

Settings for unit operation like Multi-dial, EN81-28 Mode, Consec. dial.

ID Code and Volume Settings

Setting the unit's ID code for monitoring and adjusting audio volume.

Hardware Monitoring and Delays

Hardware Monitoring Settings

Configuration of hardware checks like Power Supply, Battery, Phone Line.

Delay Settings Explained

Configuration of various delays for call initiation and hang-up.

Messages, Time/Date, and Advanced Settings

Message Configuration

Setup of Location, Reassurance, and Guidance messages.

Advanced Settings

Configuration of Passcode, Network ID, PBX Frequency, and Language.

Relay Mode Configuration

Relay Mode Functions

Explanation of how the relay operates for different modes like Siren, Door Release, PSTN fault.

Relay Override and Templates

Relay Override Settings

Settings for manual override of the relay's state (None, Open, Closed).

Programming Templates

Saving and loading programming configurations to the C100 PT.