Memorex MB2054 - Erasing Individual Messages; Erasing All Messages in File Folders

11
ERASING A SINGLE MESSAGE
While in the Stop mode, press
and hold the ERASE button ❶
AND the REC/STOP button ❷ for
3 seconds. All and ERASE will
blink in the display.
A B C
VOX
SPLP
1
2
1
To erase all the messages, press
the ERASE button again within 5
seconds. If the ERASE button is not
pressed again within the 5 seconds,
the messages will not erase.
2
ERASING ALL MESSAGES IN THE 3 FILE FOLDERS
OPERATION
IMPORTANT NOTES:
• Once message(s) are deleted, they cannot be recovered.
• When the memory is full, FULL will appear in the display.
• You must select a file folder that has at least 1 message recorded to
erase all.
Turn the unit on, and select the
desired file folder using the FILE
button ❶ , and the desired
message to delete using the
RVS/FWD button ❷; the message
number and the message length
will appear in the display.
A B C
VOX
SPLP
2
1
1
Press the ERASE button; ERASE
will appear in the display and the
first 5 seconds of the message
will play. To erase, press the
ERASE button within the 5
seconds it is playing and the rest
of the messages will be
renumbered. If you do not want to
erase, do not press the ERASE
button while it is playing.
2
MB2054 O/M.QXD 8/12/02 11:16 AM Page 11