Memorex MVD1402 User Manual (English)

Other manuals for Memorex MVD1402

Questions and Answers:

S
steinjeremyAug 20, 2025
Why is my Memorex TV DVD Combo remote control not working?
- J
  John HardyAug 20, 2025
  There are several reasons why the remote control might not be working: * The batteries may be weak or dead: Install fresh batteries. * The batteries may not be installed properly: Install batteries according to the diagram. * The remote may not be aimed at the sensor: Aim the remote at the sensor. * The distance may be too far or there is too much light in the room: Operate within 20ft, or reduce the light in the room. * There may be an obstacle in the path of the beam: Move the obstacle.
D
David RomeroAug 22, 2025
What to do if there is no picture on my Memorex MVD1402 TV DVD Combo?
- J
  Jason BennettAug 22, 2025
  If there's no picture on your Memorex TV DVD Combo, consider these potential causes: * The equipment is not connected properly: Connect the equipment according to the instructions. * The INPUT of the TV is not set to receive the DVD signal output: Press the TV/DVD button to select TV, then press the TV/AV button to select DVD. * The video cables (if using an external unit) are not securely connected: Connect the video cables securely. * The connected external TV power is off: Turn the TV on.
S
Sara SanchezAug 25, 2025
Why is there no sound coming from my Memorex MVD1402 TV DVD Combo?
- A
  Angel RodriguezAug 25, 2025
  If you're experiencing a lack of sound, here are a few things to check: * The equipment is not connected properly: Connect the equipment according to the instructions. * The external equipment connected with the audio cable is not set to receive the DVD signal input: Select the appropriate audio input mode. * The audio cables (if using an external unit) are not securely connected: Connect the audio cables securely. * The connected receiver’s power is off: Turn the audio receiver on.
D
David TownsendAug 26, 2025
How to fix a Memorex MVD1402 that has no power?
- B
  brownmckenzieAug 26, 2025
  If your Memorex TV DVD Combo has no power, the AC cord might be unplugged. Plug the AC cord into an AC outlet.
S
Stephen DuarteAug 28, 2025
What to do if my Memorex MVD1402 does not start playback?
- C
  Christopher WebbAug 28, 2025
  If your Memorex TV DVD Combo doesn't start playback, consider the following: * The rating level may be set to block the DVD: Enter your password, and/or change the rating level. * The DVD may not be inserted, or inserted upside-down: Insert DVD correctly. * DVD is not selected: Press the TV/DVD button to select the DVD mode. * The disc is not placed in the guide: Place the disc on the disc tray correctly inside the guide. * The disc is dirty: Clean the disc.
S
Steven GonzalezAug 30, 2025
What to do if my Memorex MVD1402 power is on, but the unit is not functioning properly?
- F
  fjohnsonAug 30, 2025
  If your Memorex TV DVD Combo is powered on but not functioning correctly, here are some possible solutions: * Condensation has formed: Unplug the unit and wait about one to two hours to allow the player to dry. * Wrong type of disc inserted: This unit cannot play discs other than DVD, VCD, or standard CDs. * Unit needs to be reset: Press the POWER button, then unplug the AC cord. Wait one minute and then plug the unit back in. * The disc is dirty or inserted incorrectly: Clean disc and insert label side-up. * Some features and functions are not available on all discs: This is normal; try another function.
X
Xavier BuckleySep 1, 2025
How do I adjust the picture size on my Memorex MVD1402?
- E
  elizabeth52Sep 1, 2025
  If the picture isn't fitting properly on your Memorex TV DVD Combo, the wrong menu option might be selected in the General Setup Menu. Select the TV type (4:3PS, 4:3LB, 16:9) which matches the external TV used.
D
Dustin JonesSep 3, 2025
How do I fix a rolling playback picture on my Memorex TV DVD Combo?
- S
  Sarah WoodsSep 3, 2025
  If the playback picture rolls on your Memorex TV DVD Combo, the unit may need to be reset to NTSC. Set the menu option to NTSC.
N
nathan08Sep 5, 2025
Why are subtitles not working on my Memorex MVD1402?
- P
  parksshaneSep 5, 2025
  If subtitles are not working properly on your Memorex TV DVD Combo: * Subtitles appear only when the discs contain them: This is normal; try another disc. * Subtitles not turned on: Turn the subtitles on.
F
Felicia JohnsonSep 7, 2025
Why is the playback picture quality poor on my Memorex MVD1402 TV DVD Combo?
- D
  Daniel DavisSep 7, 2025
  If the playback picture quality is poor on your Memorex TV DVD Combo, the disc might be dirty. Clean the disc.

Memorex MVD1402 Specifications

General

Aspect Ratio	4:3
Inputs	Composite Video
Outputs	Composite Video, Headphone
Power Source	AC 120V, 60 Hz
Screen Size	14 inches
Weight	13.2 lbs
Remote Control	Included
Supported DVD Formats	CD, CD-R

Related product manuals