Memorex MX4107 - Playing Compact Discs; Normal CD Playback; CD Pause and Stop Control

9
Press the POWER button to turn
the unit on.
1
If in the Stop mode, press the PLAY/PAUSE (®p) button to begin
playback on Track 1.
4
Press the OPEN/Close button and
gently press a CD onto the center
spindle with the label side facing
up. Press the OPEN/Close button
again to close the CD
compartment. The CD will
automatically start playing.
NOTE: 3 inch single or standard
CDs can be used with this unit.
3
Press the CD Function button;
“CD” appears in the display.
2
Press the PRESET EQ button 1
and the VOLUME buttons 2 as
desired. Playback will continue
until all the tracks on the disc
have been played
2
1
2
5
To stop playback before the disc
ends, press the STOP/BAND (■)
button. The disc will stop and the
display will show the total number
of tracks and playing time on the
disc.
6
PLAYING COMPACT DISCS
NORMAL PLAYBACK
OPERATING INSTRUCTIONS (CONTINUED)
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (
®p)
button. Playback stops but the
disc continues to spin and the
time display will blink.
1
Press the PLAY/PAUSE (®p)
button again to release pause and
resume normal CD playback.
2
CD PAUSE CONTROL