To Next PageTo Next PageWhat to do if the red LED is flashing on my Mennekes AMTRON Compact 3.7 C2 Automobile Accessories?
If the red LED is flashing, it indicates that the maximum charging current has been exceeded, a DC residual current is present, or there is an overtemperature issue. To resolve this, terminate the charging process and disconnect the charging cable.
Why switching relays no longer turn off in Mennekes AMTRON Compact 3.7 C2 Automobile Accessories?
If the switching relays no longer turn off, the device is defective and can only be repaired by MENNEKES.
What to do if the self test of the DC residual current detection has failed in Mennekes AMTRON Compact 3.7 C2?
If the self-test of the DC residual current detection has failed, it means the device is defective and can only be repaired by MENNEKES.
General| Brand | Mennekes |
|---|---|
| Model | AMTRON Compact 3.7 C2 |
| Category | Automobile Accessories |
| Language | English |
Information on how to contact MENNEKES for technical questions or support.
Explanation of danger, warning, caution, and attention notices used in the manual.
Defines operator and qualified electrician roles and responsibilities for safe device use.
Specifies the device's purpose as a charging station for electric vehicles.
Explains the information provided on the device's rating plate.
Lists all items included in the product packaging for installation and use.
Describes the physical components and layout of the device's front and inside views.
Details the different operational states and configurations of the charging device.
Explains the meaning of LED indicators for device status and operation modes.
Guidelines for selecting a suitable installation site, considering environmental and spatial factors.
Defines the environmental parameters (temperature, humidity, altitude) for safe operation.
Instructions for routing the power supply line, considering local conditions and cable length.
Guidance on safely routing the cable for an external switching contact to prevent electric shock.
Details requirements for circuit breakers and residual current devices for safe electrical connection.
Details on connecting the device to different power supply networks (TN, TT, IT).
Instructions for connecting an external switching contact for load management or authorisation.
Guide to configuring device settings using the 4 configuration switches and 2 rotary encoder switches.
Explanation of authorisation methods for using the charging device.
Step-by-step guide for charging an electric vehicle and terminating the process.
Guidelines for regular inspection and maintenance to ensure safe and reliable operation.
Schedule and tasks for performing maintenance on device components at different intervals.
Instructions for safely cleaning the exterior of the device to prevent electric shock.
User-solvable faults indicated by flashing red LED and steps to resolve them.
Faults requiring a qualified electrician, indicated by a solid red LED.
