Why is my Menuett 002-204 not making ice?
If your Menuett Ice Maker is running but not producing ice, the room temperature or the water temperature might be too high. The room temperature should be between 10–43°C, and the water temperature should be between 8–32°C. Alternatively, there may be refrigerant leakage or a blocked pipe in the cooling system, in which case you should contact an authorised service centre.
What to do if the ADD WATER light is on in my Menuett 002-204 Ice Maker?
If the ADD WATER status light is illuminated on your Menuett Ice Maker, it means there is no water in the unit. Turn off the ice maker using the ON/OFF button, refill the water, and then restart the ice maker.
How to empty Menuett Ice Maker when the ICE FULL light is on?
When the ICE FULL light illuminates on your Menuett Ice Maker, it indicates that the ice container is full. Remove the ice from the container. Then, press the SELECT button for 5 seconds.
Why do the ice cubes stick together in my Menuett Ice Maker?
Ice cubes may stick together in your Menuett Ice Maker if the ice making cycle is too long or the water temperature is too low. To resolve this, switch off the ice maker, wait for the ice cubes to melt, and then restart it, selecting the small ice cube size (S) using the SELECT button. Also, change the water; the recommended water temperature is 8–32°C.
Instructions for operating the automatic ice maker.
Steps for preparing the ice maker before its initial operation.
Instructions for operating the ice maker during regular use.
To Next Page
General