Menvier Security TS510 User Manual

TS510 & TS500
Installation & User Guide
Compatible Equipment
TS510 REM - Remote Keypad
9040 - Loudspeaker
DC54/58 - Digital Communicator
SD1+ - Speech Dialler
496525 Issue A 1 of 10 TS510 and TS500

Menvier Security TS510 Specifications

General

Brand	Menvier Security
Model	TS510
Category	Security System
Language	English

Summary

System Wiring

Planning and Installing Wiring

Provides guidelines for separating cables, mains entry, and insulation testing for safe installation.

Remote Keypad Installation

Digital Communicator Installation

Digital Communicator Wiring

TS510 Digital Communicator Wiring

Details wiring connections for DC3 and TS510.REM, and TS510.IF and TS510.REM.

TS500 Digital Communicator Wiring

Shows wiring for DC3 and TS500.REM, and TS500/510.IF and TS500.REM connections.

Key Functions

Engineer's Reset

Procedure to enter Engineer mode and reset the system using a specific code.

Loading Defaults

Steps to restore the panel to its factory default programming settings.

Engineers Programming

Zone Programming

Guides on programming zones as standard NIGHT, LAST EXIT, ACCESS, or FIRE circuits.

Entry and Bell Timing

Instructions for setting entry time, bell duration, and bell delay parameters.

Signalling and Fire Options

Details how to configure signalling options and fire output signals for different scenarios.

User Functions

Setting the System

Part Set the System

Testing Sounders

Testing Detectors

Change User Passcode

Fault Finding

CALL ENGR Flashing

CALL ENGR Illuminated

TAMPER Illuminated or Flashing

POWER Light Out