EasyManua.ls Logo

Mepla Alfit Soft-close - Page 7

Mepla Alfit Soft-close
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Information
Warning
Usage of low grade board material or furniture doors under-
going constant rough usage, the screwing of the adapter with
screws Ø 3 mm is recommended.
Soft-close®CST is not recommended for frame door application.
Position f0r Soft-close® CST
Position for additionalSoft-close® CST
(recommended)
Soft-close®
The installing of our furniture fittings must comply with the
Mepla-Alfit instructions that are stated in our available sales
brochures, otherwise Mepla-Alfit can’t be held liable. If further
information on installation and assembly is needed, please
contact one of our factories directly.
Thank you for your understanding.
1.5.7