Meraki Cisco MS425 Series User Manual

8. (Optional) Install additional SFP+ or QSFP+ units as needed, depending on the compatibility of your model.
Mounting hardware
The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that there is sufficient space between the rear of
the rack and other obstacles to ensure adequate airflow.
Bringing your Stack Online
When connecting up your MS425 for the first time all of the ports are set as ethernet. Once the switches are online you can convert any port to a Stack port by
simply selecting the option under the interface configuration as shown below:
12

Meraki Cisco MS425 Series Specifications

General

Layer	Layer 3
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
Ports	16 x 10G SFP+
Power Supply	Dual, hot-swappable
Management	Managed via Cisco Meraki Dashboard
Model	MS425-16, MS425-32