Merax MS304749 - Page 20

7
Distance display: When the indicator light of distance is on, it will display the accumulated distance
in manual mode and programs or the countdown distance in countdown modes.
Calorie display: When the calorie indicator light is on, it will display the accumulated calorie value
in manual mode and programs or the countdown calorie value in calorie countdown
mode.
Automatic program
Translation of Error codes
Error code Description Solution
E1
Communication
Abnormal: when the
power is on, the
connection between
lower controller and the
console is abnormal.
Possible Cause:
The communication between the lower controller and console is
blocked, check each joint between the controller and console,
ensure that each core is fully plugged in. Check the connection line,
replace it if it’s damaged.
E2
No signal from motor.
Possible Cause:
Check the motor cable to see whether it is connected well or not, if
not, connect the motor wire again.
Check the motor cable to see whether it is damaged or has a burnt
smell, if yes, replace the motor.

01
02 03 04 05 06 07 08 09 10 11
12
13 14 15 16 17 18 19
20 21 22
23
24 25 26 27 28 29 30 31 32 33